OSE12P V1.12

The following code changes from V1.11 have been made...
	- Added VT/VY Cluster Support. Use the Flashtool V1.49 or later and the ALDL Editor to setup
	- Added Option to Always Use Default/Calculated MAP for experimental Alpha-N
	- Force Open Loop Option
	- 100 - 300% Added For Boost Multipliers. Was previoisly only 100-200%
		Auto selection for 2/3 bar MAP sensor to have 0-100% or 0-200% based on sensor type
	- Added ignition dwell items to cal
	- Added Code 48 for high boost pressure. Code 48 can be used for over boost fuel cut.
	- Added option to use dedicated baro sensor on pin b12
		Code 32 for fault detection

ALDL Changes
	- Changed the injector PW term to one that does not change with single/double fire